Chains and accessories

The 200 chains are suitable for lifting and anchoring chains and withstand operating temperatures between -40 ° C and  200 ° C. These chains are available in sizes from 5 to 32 mm and the standard surface is sandblasted and painted transparent.

mechanical values for G10 / PAS 1061. They are also BG approved and are ideal for assembling slings and anchor chains as well as for lifting and transporting loads. Permissible operating temperature is between -40 ° C and   380 ° C

The chains are tested for their load capacity, which is an impressive 12,000 kg! The chain is electro-welded, stamped and with greater resistance to acids and caustics.

Declared working load limit applies with safety factor 4. Production according to EN 818-2 and DNV 2.7-1 and / or EN 12079-2. Suitable for mounting chain slings for offshore container lifting procedures. Type approved according to DNV 2.7-1. Approval certificate n. S-8253.

Ideal for quick and easy assembly of chain slings using Connex connection elements. Also suitable as a final link. The flattened section allows universal connection options, an important feature of this high-quality connection. The links are produced according to EN 1677-4 with mechanical values for G10. BG homologation, CE marking and complete operating manual available.

It is ideal for simple and quick assembly of Connex link chains, as a main link in welded systems and as a final link. Its internal dimensions are larger than those of the main AW connection, making it suitable for larger crane hooks or special hooks.

and as the final link in soldered systems.

The flattened section opens up universal connection possibilities. CE marking and BG approval guarantee quality. This transition connection is manufactured according to EN 1677-4 with mechanical values according to G10 and comes with a comprehensive operating manual, which offers users exceptional versatility at the highest level.

of slings for III and IV leg chains in assembled or welded systems. It is produced according to EN 1677-4 with mechanical values for G10. A flattened section on the transition connections opens up further universal connection possibilities (measurements can be obtained from the "BW" product). Includes CE marking, BG approval and complete operating manual.

a bolt and a safety compass. For connecting main ring and chain, chain and chain, chain and hook, main ring and hook and much more! Thanks to the sophisticated design, no special tools are required. To maintain the high quality of this product, it is recommended to replace the pin and the tension sleeve after three assemblies / disassemblies. The product is manufactured according to EN 1677-1 with mechanical values for G10. BG approval, CE mark and full operating manual are included.

manufactured with a forged safety hook that locks in the tip of the hook, thus offering greater protection against lateral displacements. The hook is suitable for Connex and the welded system and is manufactured according to EN 1677-2 with the mechanical values of G10. It comes with a safety catch with stainless steel spring and safety sleeve and can be assembled quickly, without the need for special tools. Includes CE marking, BG approval and complete operating manual.

which means it cannot open under load. It is perfect in combination with the Connex system and also offers additional universal connection options thanks to the flattened section on the eye. Since it comes with a wider jaw opening than HSW, it can be used much more flexibly. The hook corresponds to EN 1677-3, with the mechanical values of G10 and is supplied with a complete operating manual, CE mark and BG approval.

ensures optimal interaction between chain and hook. Even if abbreviated, load capacity is not reduced. The product comes with a complete operating manual and is suitable for use with Connex and the welded system and can also be retrofitted. It complies with EN 1677-1 with mechanical values for G10 and is supplied with the CE mark. Note that it is not suitable for peak loading and cannot be used with Unilock connection links.

are electro-galvanised and a stainless steel spring are synonymous with safety. The sets of safety devices are in a separate category: even the smallest Pewag parts offer exceptional quality!

Stainless steel springs are synonymous with safety. The sets of safety devices are in a separate category: even the smallest Pewag parts offer exceptional quality!

and a stainless steel spring are all focused on safety. The sets of safety devices are in a separate category: even the smallest Pewag parts offer exceptional quality!

Stainless steel springs are synonymous with safety. The sets of safety devices are in a separate category: even the smallest Pewag parts offer exceptional quality!